| 1 | Euramet cg 2 / 02-03.2011 | Calibration of gauge block comparators |
| 2 | Euramet cg 3 / 01-03.2011 | Calibration of pressure balances |
| 3 | Euramet cg 4 / 02-03.2011 | Uncertainty of force measurements |
| 4 | Euramet cg 6 / 02-03.2011 | Extent of calibration for cylindrical diameter standards |
| 5 | Euramet cg 7 / 01-06.2011 | Calibration of oscilloscopes |
| 6 | Euramet cg 8 / 02.1-10.2011 | Calibration of termocouples |
| 7 | Euramet cg 10 / 02.1-12.2012 | Determination of pitch diameter of parallel thread gauges by mechanical probing |
| 8 | Euramet cg 11 / 02.0-03.2011 | Calibration of temperature ındıcator |
| 9 | Euramet cg 12 / 02.0-03.2011 | Calibration of vector network analysers |
| 10 | Euramet cg 13 / 03.0-02.2015 | Calibration of temperature block calibrators |
| 11 | Euramet cg 14 / 02.0-03.2011 | Calibration of static torque |
| 12 | Euramet cg 15 / 03.0-02.2015 | Calibration of digital multimeters |
| 13 | Euramet cg 16 / 02.0-03.2011 | Estimation of uncertainty hardness |
| 14 | Euramet cg 17 / 03.0-04.2017 | Calibration of electromechanical and mechanical manometers |
| 15 | Euramet cg 18 / 04.0-11.2015 | Calibration of non-automatic weighing instruments |
| 16 | Euramet cg 19 / 02.1-03.2012 | Determination of uncertainty in gravimetric volume |
| 17 | Euramet cg 20 / 04.0-02.2015 | Calibration of temperature and humidity |
| 18 | Euramet cg 21 / 01.0-04.2013 | Calibration of standard capacity measures using the volumetric method |
| 19 | Dkd-r-6-1 / 01-2013 | Calibration of pressure gauges |
| 20 | Dkd-r-5-7 / 07-2004 | Calibration of climatic chambers |
| 21 | Oıml-r-133 / 2002 | Liquid in glass thermometers |
| 22 | Iso 6789 / 02-2017 | Requirements for calibration and determination of measurement uncertainty |
| 23 | Iso 6789 / 01-2017 | Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration |
| 24 | BS EN ISO 4787 / 03-2011 | Laboratory glassware-volumetric instruments-methods for testing of capacity and for use |
| 25 | BS EN ISO 2811 / 1-2016 | Paints and varnishes-determination of densit-pycnometer method |
| 26 | EN ISO 385 / 04-2005 | Laboratory glassware-burettes |
| 27 | ISO 648 / 10-2008 | Laboratory glassware – single-volumepipettes |
| 28 | ISO 835 / 04-2007 | Laboratory glassware – graduated pipettes |
| 29 | ISO 1042 / 08-1999 | Laboratory glassware – one-mark-volumetric flasks |
| 30 | EN ISO 2811 / 1 -2001 | Paints and varnishes – determination of density pyknometer method |
| 31 | ISO 3507 / 04-1999 | Laboratory glassware-pyknometers |
| 32 | ISO 3585 / 07-1998 | Borosilicate glass 3.3 – properties |
| 33 | ISO 3696 / 04-1987 | Water for analytical laboratory use specification and test methods |
| 34 | EN ISO 4787 / 03-2011 | Laboratory glassware – volumetric instruments – methods for testing of capacity and for use |
| 35 | ISO 4788 / 05-2005 | Laboratory glassware-Graduated measuring cylinders |
| 36 | EN ISO 8655-1 / 09-2002 | Piston-operated volumetric apparatus |
| 37 | EN ISO 8655-2 / 09-2002 | Piston-operated volumetric apparatus |
| 38 | EN ISO 8655-6 / 09-2002 | Piston-operated volumetric apparatus – gravimetric methods for the determination of measurement error |
| 39 | ISO/TR 20461 / 11-2000 | Determination of uncertainty for volume measurements made using the gravimetric method |
| 40 | OIML R 120 / 2010 | Standard capacity measures for testing measuring systems for liquids other than water |
| 41 | VDI/VDE/DGQ 2618-Blatt 1.1 / 2001-12 | Instructions to inspect measuring and test equipment for geometrical quantities |
| 42 | VDI/VDE/DGQ 2618-Blatt 1.2 / 2003-12 | Instructions for the inspection of measuring and test equipment for geometrical quantities Uncertainty of measurement |
| 43 | VDI/VDE/DGQ 2618-Blatt 3.1 / 2004-01 | Test instruction for gauge blocks |
| 44 | VDI/VDE/DGQ 2618-Blatt 4.1 / 2007-02 | Test instruction for conıcal gauges |
| 45 | VDI/VDE/DGQ 2618-Blatt 4.2 / 2007-07 | Test instruction for pins screws |
| 46 | VDI/VDE/DGQ 2618-Blatt 4.7 / 2005-06 | Test instruction for gap gauges |
| 47 | VDI/VDE/DGQ 2618-Blatt 4.8 / 2006-04 | Setting plugs, plug gauges and test plugs for cylindrical threads |
| 48 | VDI/VDE/DGQ 2618-Blatt 4.9 / 2006-04 | Test instruction for setting rings and ring gauges for cylindrical threads |
| 49 | VDI/VDE/DGQ 2618-Blatt 12.4 / 2006-07 | Test instruction for conıcal gauges |
| 50 | VDI/VDE/DGQ 2618-Blatt 09.1 / 2006-03 | Test instruction for callipers |
| 51 | VDI/VDE/DGQ 2618-Blatt 09.2 / 2006-03 | Test instruction for depth callipers |
| 52 | VDI/VDE/DGQ 2618-Blatt 09.3 / 2006-03 | Test instruction for height callipers |
| 53 | VDI/VDE/DGQ 2618-Blatt 10.1 / 2006-11 | Test instructions for micrometers |
| 54 | VDI/VDE/DGQ 2618-Blatt 10.3 / 2002-08 | Test instructions for micrometers with dial indicator |
| 55 | VDI/VDE/DGQ 2618-Blatt 10.8 / 2002-08 | Test instructions for internal micrometers with three-point contact |
| 56 | VDI/VDE/DGQ 2618-Blatt 11.2 / 2002-08 | Test instructions for dial indicators for linear measurement with mechanical indication |
| 57 | VDI/VDE/DGQ 2618-Blatt 11.3 / 2002-09 | Test instructions for lever gauges |
| 58 | VDI/VDE/DGQ 2618-Blatt 12.1 / 2005-02 | Test instruction for lever gauges (quicktests) for external measurement |
| 59 | VDI/VDE/DGQ 2618-Blatt 13.1 / 2005-02 | Test instructions for lever gauges (quicktests) for internal measurements |
| 60 | VDI/VDE/DGQ 2618-Blatt 13.2 / 2005-11 | Test instructions for bore gauges – 2 point |
| 61 | VDI/VDE/DGQ 2618-Blatt 7.2 / 2008-07 | Test instructions for protractors |
| 62 | VDI/VDE/DGQ 2618-Blatt 10.4 / 2008-12 | Test instructions for mıcrometer heads |
| 63 | VDI/VDE/DGQ 2618-Blatt 4.4 / 2009-09 | Test instructions for reference gauge |
| 64 | VDI/VDE/DGQ 2618-Blatt 6.1 / 2009-09 | Test instructions for optical flats |
| 65 | VDI/VDE/DGQ 2618-Blatt 16.1/ 2009-10 | Test instructions for height gauges |
| 66 | VDI/VDE/DGQ 2618-Blatt 10.2/ 2010-04 | Test instructions for micrometers for screw thread measurement |
| 67 | VDI/VDE/DGQ 2618-Blatt 10.5/ 2010-08 | Test instructions for depth micrometers |
| 68 | VDI/VDE/DGQ 2618-Blatt 10.6/ 2010-08 | Test instructions for height micrometers |
| 69 | VDI/VDE/DGQ 2618-Blatt 10.7/ 2010-08 | Test instructions for internal micrometers with 2 point contact |
| 70 | VDI/VDE/DGQ 2618-Blatt 14.1/ 2010-08 | Test instructions for electrical linear measuring |
| 71 | VDI/VDE/DGQ 2618-Blatt 7.1/ 2011-12 | Test instructions for steel squares |
| 72 | VDI/VDE/DGQ 2618-Blatt 5.2/ 2013-12 | Test instructions for knife edge straight edges |
| 73 | VDI/VDE/DGQ 2618-Blatt 5.1/ 2013-09 | Test instructions for straight edges |
| 74 | VDI/VDE/DGQ 2618-Blatt 11.1/ 2014-09 | Test instructions for mechanical dial gauges |
| 75 | ASTM E 275 / 08-2013 | Standard practice for describing and measuring performance of ultraviolet and visible spectrophotometers |
